Description
SYLPYL 750 DECORPLASTIC HBE PRIMER is in the range of low priced high-quality high build architectural primer-sealer, with very good performance characteristics that its main goal is to improve top coat performance and finish. This primer ensures the finish coat appearance is smoother with a uniform sheen that also fills rough surfaces and uneven new drywall. It helps to fill pores, pinholes and cover minor drywall damages and sanding grooves.
Since it is an acrylic primer, it is a popular choice due to its low odor. Many people find they are bothered by the scent of other paints, especially oil paints. This acrylic paint is water based but becomes water resistant when dry. It may be used to seal and protect all kind of surfaces and will adhere to almost any material. This paint dries incredibly quickly compared to the drying time of the high cost of other acrylic paints.
It has an excellent durability and hide. Provides a high resistance to peeling, blistering and is formulated with a potent mildew-resistant additive to avoid premature stains even in humid tropical areas.
Suitable for application on concrete, stucco, gypsum, gypsum boards, drywall, walls, ceilings, and trim of primed plaster,wallboard, wood, masonry, and primed metal.
SYLPYL 750 DECORPLASTIC HBE Primer, is a very versatile high build economic acrylic primer. Special for interior and exterior walls, ceilings and exterior of buildings in general. In new surfaces apply first one coat of our primer-sealer. VOC compliant with less than 50 grams per litre.
TYPE
Acrylic Latex
FINISH
Flat 5 units @ 85°
SOLIDS BY VOLUME %
40 +-2%
WEIGHT SOLIDS
54 ± 2%
WEIGHT PER GALLON
10+-2 lbs
VISCOSITY
90-120 KU
DENSITY
1.11-1.31 G/ML
FLASH POINT
N.A
WASH ABILITY
More than 12,000 cycles.
THEORETICAL COVERAGE
390-405 sq.ft. per gallon @ 4 mils wet 1.7 mils dry.
PRACTICAL COVERAGE IN SQUARE FEET PER GALLON
350-365 average. This coverage can be less, depending on the roughness of the surface and the method of application.
TYPE OF SURFACE/ FINAL THICKNESS 2 COATS
Smooth 400-460 ft² per gallon, Textured 340-390 ft² per gallon, Rough 240-320- ft² per gallon
V.O.C. (less exempt solvents)
38.8 grams per litre; 0.34 lbs. per gallon As per 40 CFR 47.52. VOC compliant with less than 50 grams per Litre.
NUMBER OF COATS RECOMMENDED
ONE
OVER POROUS SURFACES SUCH AS CONCRETE
We recommend to apply one or 2 coats of SYLPYL 750 LINE HBE PRIMER (syl 78) primer-sealer to improve coverage. Allow new concrete to cure a minimum of 28 days.
THINNER
Clean water. Max 10%.
TO TOUCH
60 Minutes
HARD
90 Minutes
TO RECOAT
4 Hours Drying and recoat times are humidity, temperature, and film thickness dependent.
SURFACE PREPARATION
Fill cracks, pits and voids with patching Mortar. Remove dirt, grease, mildew, loose rust, peeling paint or other contamination to ensure good adhesion. Glossy surfaces: Lightly sand to a dull finish. Unpainted plasterboard, brick, cement: Apply one coat of Syl HBE PRIMER, water based all-in-one Vinyl Acrylic interior/exterior primer/sealer/undercoat with excellent hiding power. Surface must be dry.
APPLICATION METHOD
Roller, brush, conventional spray and airless.
SHELF LIFE AT 77°F (25°C)
Minimum 36 months in unopened containers. Inside proper fresh warehouses.
PACKAGING5 gallon and in Bulk 250 gallons totes.