Download Technical Data SheetDescription
SYLPYL 750 DECORPLASTIC PRO BC 4.00 is in the range of high-quality VOC compliant architectural paints, with very good performance characteristics like including good hide and touchup,, compared to the medium of price range of architectural paints.
Since it is an acrylic paint, it is a popular choice due to its low odor. Many people find they are bothered by the scent of other paints, especially oil paints. This acrylic paint is water based but becomes water resistant when dry. It may be used to seal and protect all kind of surfaces and will adhere to almost any material.
This paint dries incredibly quickly compared to the drying time of the high cost of other acrylic paints. It has an excellent durability and hide. Provides a high resistance to peeling, blistering and is formulated with a potent mildew-resistant additive to avoid premature stains even in humid tropical areas.
Suitable for application on concrete, stucco, gypsum, gypsum boards, drywall, stone, vinyl, aluminum, metals, windows, doors, shutters, trim, garage doors, outdoor furniture, iron and railing.
SYLPYL 750 DECORPLASTIC PRO BC 4.00 is a very versatile and economy conscious acrylic paint. Its eggshell or flat finish, gives a very elegant texture for an outstanding architectural finish, special for interior and exterior walls, ceilings and exterior of buildings in general.
In new surfaces apply first one coat of our primer-sealer SYLPYL 750 LINE HBE PRIMER (SYL 78) to highly improve coverage.
TYPE
Acrylic Latex
FINISH
Flat and Eggshell
SOLIDS BY VOLUME %
40 +-2%
WEIGHT SOLIDS
54 ± 2%
WEIGHT PER GALLON
10+-2 lbs
VISCOSITY
90-120 KU
DENSITY
1.11-1.31 G/ML
FLASH POINT
N.A
WASH ABILITY
More than 12,000 cycles.
THEORETICAL COVERAGE
390-405 sq.ft. per gallon @ 4 mils wet 1.7 mils dry.
PRACTICAL COVERAGE IN SQUARE FEET PER GALLON
350-365 average. This coverage can be less, depending on the roughness of the surface and the method of application.
TYPE OF SURFACE/ FINAL THICKNESS 2 COATS
Smooth 400-460 ft² per gallon, Textured 340-390 ft² per gallon, Rough 240-320- ft² per gallon
V.O.C. (less exempt solvents)
38.8 grams per litre; 0.34 lbs. per gallon As per 40 CFR 47.52. LEED V4 VOC Compliant with less than 50 grams per Litre
NUMBER OF COATS RECOMMENDED
TWO.
OVER POROUS SURFACES SUCH AS CONCRETE
We recommend to apply one coat of SYLPYL 750 LINE HBE PRIMER (SYL 78) primer-sealer to improve coverage. If no sealer is used in new surfaces, apply three coats. Allow new concrete to cure a minimum of 28 days.
THINNER
Clean water. Max 10%.
TO TOUCH
60 Minutes
HARD
90 Minutes
TO RECOAT
4 Hours Drying and recoat times are humidity, temperature, and film thickness dependent
SURFACE PREPARATION
Fill cracks, pits and voids with patching Mortar. Remove dirt, grease, mildew, loose rust, peeling paint or other contamination to ensure good adhesion. Glossy surfaces: Lightly sand to a dull finish. Unpainted plasterboard, brick, cement: Apply one coat of Syl HBE PRIMER, water based all-in-one Vinyl Acrylic interior/exterior primer/sealer/undercoat with excellent hiding power. Surface must be dry.
APPLICATION METHOD
Roller, brush, conventional spray and airless.
SHELF LIFE AT 77°F (25°C)
Minimum 36 months in unopened containers. Inside proper fresh warehouses.
PACKAGING
5 gallon and in Bulk 250 gallons totes.
